How to Use the Swiftlet Everything Bundle for Camping
By Kammok: High Performance Gear to Elevate Camp | Published: 2026-10-25
Category: How-to Guides
Learn how to set up and enjoy the Swiftlet Everything Bundle for camping. This guide covers stand assembly, hammock hanging, and tips for a relaxing hang.
Quick answer
Set up the Swiftlet Everything Bundle by assembling the portable stand, attaching the hammock, and adding the cup holder and shade kit for a complete camp relaxation station.
Why the Swiftlet Everything Bundle simplifies camp setup
The Swiftlet Everything Bundle combines a portable hammock stand, extension bar, cup holder, Roo Double Hammock, and a free Shade Kit into one package. Instead of hunting for trees or tying knots, you can set up a stable hang spot anywhere your car can reach. The stand weighs just 15 lbs, making it easy to move from tailgate to campsite.
What to keep in mind before you start
The bundle is designed for car camping and tailgating, not backpacking. The stand requires a flat, level surface for stability. If your campsite has uneven ground, you may need to adjust the stand's legs or choose a different spot. Also, the hammock color options let you personalize your setup, but the stand's color is fixed.
Step-by-step setup guide
- 1. Unpack and lay out the stand: Remove the Swiftlet Portable Hammock Stand from its carrying bag. Extend the legs fully and lock each joint until you hear a click. Place the stand on flat, level ground. Common mistake: setting up on a slope, which makes the stand unstable. Check that all leg locks are engaged before continuing.
- 2. Attach the extension bar: Slide the Swiftlet Extension Bar into the receiver on the top of the stand. Tighten the locking knob by hand until snug. This bar adds height and spread for a more comfortable hammock lay. Common mistake: over-tightening the knob, which can strip the threads. Hand-tighten only; do not use tools.
- 3. Hang the Roo Double Hammock: Clip the carabiners on each end of the Roo Double Hammock to the loops on the stand or extension bar. Adjust the suspension straps so the hammock hangs at a slight sag—about a 30-degree angle from horizontal. Common mistake: hanging the hammock too tight, which reduces comfort. Sit in the hammock to test the sag before finalizing.
- 4. Install the cup holder: Slide the Swiftlet Cupholder onto the stand's frame near your head or shoulder position. Tighten the thumb screw to secure it. The cup holder keeps your drink within reach. Common mistake: placing it too far from your seated position, making it hard to grab. Test the reach while sitting in the hammock before tightening fully.
- 5. Add the Shade Kit: Unfold the free Shade Kit and attach it to the stand using the included clips or straps. Adjust the angle to block direct sun. The Shade Kit is included at no extra cost. Common mistake: not securing all attachment points, causing the shade to flap in the wind. Tighten all straps and check stability if wind picks up.
Product facts
- Swiftlet Everything Bundle: The bundle includes a Swiftlet Portable Hammock Stand, Swiftlet Extension Bar, Swiftlet Cupholder, Roo Double Hammock, and a FREE Shade Kit. You get everything needed for a complete hammock camp setup in one purchase, saving time and ensuring compatibility.
Swiftlet Everything Bundle - Swiftlet Everything Bundle: At just 15 lbs, the Swiftlet empowers car campers and tailgaters alike to hang unrestricted from finding the perfect trees. The lightweight stand lets you set up a hammock anywhere your vehicle can reach, even in open fields or parking lots.
