How to Set Up the Swiftlet Perch Hammock Stand and Chair Bundle
By Kammok: High Performance Gear to Elevate Camp | Published: 2026-10-18
Category: How-to Guides
Learn how to quickly assemble the Swiftlet Perch Hammock Stand and Chair Bundle for portable outdoor seating without trees.
Quick answer
Set up the Swiftlet Perch Hammock Stand and Chair Bundle in under 5 minutes by attaching the hammock chair to the stand using the included carabiners and push-pin connectors—no tools or trees required.
Why a stand matters for hammock chairs
Unlike a traditional hammock that needs two anchor points, a hammock chair hangs from a single point. The Swiftlet stand provides that point anywhere—on sand, grass, or pavement. The stand weighs just 15 lbs and collapses into a portable size, so you can take it to tailgates, beach days, or campsites where trees are scarce.
The main trade-off is that the stand takes up floor space (about 6 feet wide when assembled), so it's better for open areas than tight campsites. But for car camping or front-yard lounging, the convenience of not hunting for trees makes up for it.
Step-by-step setup guide
- Unfold the stand legs: Remove the Swiftlet stand from its carry bag. Pull the legs outward until they lock into place with the push pins. Listen for a click—that means the pin has fully engaged. Common mistake: forcing the legs without aligning the push pin hole. If the leg won't lock, rotate it slightly until the pin pops through.
- Attach the hammock chair to the stand: Locate the suspension loop at the top of the hammock chair. Clip the carabiner (included with the bundle) through the loop and then onto the hanging ring at the top of the stand. Give a gentle tug to confirm the carabiner gate is closed. Common mistake: using a carabiner that is not rated for weight—always use the one provided. Check that the carabiner gate is fully closed and not cross-loaded.
- Adjust the chair height and test stability: Sit gently into the chair to let the suspension settle. If the chair hangs too low or too high, adjust the suspension webbing or rope length using the adjuster buckle. The ideal height lets your feet rest flat on the ground while seated. Common mistake: skipping the test sit and ending up with a chair that drags on the ground or is too high to enter comfortably. Adjust before fully loading the chair to avoid having to unclip and redo.
Product facts
- Swiftlet Perch Hammock Stand & Chair Bundle: At just 15 lbs, the Swiftlet empowers car campers and tailgaters alike to hang unrestricted from finding the perfect pair of trees. You can carry the stand in one hand and set up a comfortable chair wherever you park, without scouting for anchor points.
Swiftlet Perch Hammock Stand & Chair Bundle
