Crosswing Talon Mount Kit Setup Guide
By Kammok: High Performance Gear to Elevate Camp | Published: 2026-10-21
Category: How-to Guides
Learn how to install the Crosswing Talon Mount Kit step by step, including clamping to crossbars or using T-slots for a secure fit.
Quick Answer
Mount your Crosswing awning with the Talon Mount Kit by clamping to your crossbars or using the T-slot adapter for a direct fit. Follow the steps below for a secure, rattle-free setup.
Why the Talon Mount Kit is a versatile choice
The Crosswing Talon Mount Kit is designed as a modular mounting solution. You can use its components independently or combine them with other kits to build a mount that fits your specific vehicle and rack setup.
This flexibility means you aren't locked into one mounting style. Whether you have stock crossbars or aftermarket T-slot rails, the Talon Mount Kit adapts to your rig.
Choosing between clamp plates and T-slots
The kit includes clamp plates that secure the awning over a wide range of stock and aftermarket crossbar rack systems. If your rack has T-slots, you can skip the clamps and mount directly using the T-slot hardware.
Trade-off: Clamps are easier to install and work with almost any crossbar, but they may sit higher and add a bit of profile. T-slot mounting is lower and more secure but requires a compatible rail system.
Step-by-Step Installation
- Gather tools and inspect your crossbars: Check that your crossbars are clean and free of debris. Confirm you have the correct hardware for either clamp or T-slot mounting. Mistake: Skipping the inspection can lead to a loose fit later.
- Position the Talon Mount plates: Slide the clamp plates onto your crossbars at the desired location, spacing them to match the awning's mounting points. Checkpoint: Ensure the plates are level and evenly spaced before tightening.
- Attach the awning to the plates: Place the Crosswing awning onto the plates and insert the bolts. Hand-tighten first to allow adjustment. Mistake: Overtightening before alignment can strip threads or bind the mechanism.
- Align and tighten all fasteners: Adjust the awning so it sits square and parallel to your vehicle. Then torque all bolts to spec, working in a crisscross pattern. Checkpoint: Re-check torque after the first drive to account for settling.
- Optional: Use T-slot mounting: If your rack has T-slots, remove the clamp plates and use the T-slot hardware to mount the awning directly to the rail. Mistake: Using the wrong T-slot size can cause a loose fit—verify compatibility first.
- Test the awning operation: Open and close the awning fully to ensure smooth operation and that nothing binds or rubs. Checkpoint: If you hear unusual noise, re-check alignment and tightness.
Product Spotlight
- Crosswing Talon Mount Kit: The Talon Mount Kit is a modular mounting solution with components that can be used independently or combined with other kits. You can start with just this kit and expand later, so you only buy what your current setup needs.
Crosswing Talon Mount Kit - Crosswing Talon Mount Kit: Clamp plates secure the Crosswing awning over the widest range of stock and aftermarket crossbar rack systems. This gives you confidence that the mount will fit your existing crossbars without needing extra adapters.
- Crosswing Talon Mount Kit: You can ditch the clamp plates and mount directly using T-slots. If your rack has T-slots, this option gives a lower-profile, more integrated install.
